Isoparaffin Isopar M Machining Fluid Using SDS Available China Origin

Isoparaffin isopar M machining fluid using SDS available China origin

Product Description:

Isopar M is a highly refined isoparaffin solvent that is widely used in various industrial applications. Here are some key characteristics and properties of Isopar M:

Chemical Composition: Isopar M is composed primarily of branched alkanes, which are hydrocarbon molecules with a specific arrangement of carbon and hydrogen atoms. It is a mixture of different isoparaffinic compounds.

Appearance: Isopar M is a clear, colorless liquid with a low odor. It has a relatively low viscosity, which means it flows easily.

Purity: Isopar M is produced through a refining process that removes impurities, aromatics, and other components. This refining process results in a high level of purity, ensuring consistent quality and performance.

Boiling Range: Isopar M has a narrow boiling range, typically between approximately 160°C (320°F) and 190°C (374°F). This narrow boiling range allows for precise control over its evaporation and vaporization characteristics.

Applications of Isoparaffin M:

Features on machining fluid applications:

1. Chip Evacuation: Machining fluids aid in the efficient removal of chips, swarf, and debris generated during machining. They help flush away the chips, preventing them from interfering with the cutting process or causing damage. Proper chip evacuation improves surface finish, prevents chip recutting, and reduces the risk of tool breakage.

2. Tool Life Enhancement: Machining fluids can significantly extend tool life by reducing friction, heat, and wear. They provide a protective film on the tool surface, reducing tool-chip contact and minimizing tool adhesion and built-up edge formation. This leads to improved tool performance, reduced tool replacement frequency, and cost savings.

3. Surface Finish Improvement: Machining fluids help achieve better surface finish by reducing friction and minimizing the occurrence of built-up edge, burrs, and surface defects. They enhance the chip flow and prevent workpiece material from sticking to the cutting tool, resulting in smoother surfaces.

Advantages on machining fluid applications:

1. Lubrication: Isopar M can act as a lubricant, reducing friction between the cutting tool and the workpiece. This helps prevent excessive heat buildup and tool wear, leading to improved machining efficiency and tool life.

2. Cooling: Isopar M has good heat transfer properties, allowing it to absorb and dissipate heat generated during the machining process. By providing effective cooling, it helps maintain stable cutting temperatures and prevents thermal damage to the workpiece and cutting tool.

3. Chip Removal: Isopar M can aid in the efficient removal of chips, swarf, and other debris produced during machining. Its low viscosity and wetting properties allow it to penetrate into the cutting zone, flushing away the chips and preventing them from interfering with the machining process.

4. Corrosion Prevention: Isopar M's non-polar nature and low water content make it resistant to corrosion. By using Isopar M-based machining fluids, you can help protect the workpiece and cutting tools from corrosion, especially when working with metals that are prone to oxidation.

Packaging and Shipping of Isopar M Fluid:

Isopar M Fluid is packaged in 55-gallon steel drums or 500-pound net weight steel totes. The drums and totes are tightly sealed to prevent any leakage during shipping.

The drums and totes are then placed on standard pallets, with each pallet containing up to 4 drums or 1 tote. The pallets are shrink-wrapped to secure the packaging and prevent any movement during transportation.

For international shipping, Isopar M Fluid is classified as a hazardous material and is packaged and labeled according to the International Air Transport Association (IATA) and International Maritime Dangerous Goods (IMDG) regulations. This ensures the safe and compliant transportation of the product.

For domestic shipping within the United States, Isopar M Fluid is packaged and labeled according to the Department of Transportation (DOT) regulations.

For smaller quantities, Isopar M Fluid can also be packaged in 5-gallon pails or 1-gallon cans, which are securely sealed and labeled for safe transportation.

Shipping methods for Isopar M Fluid include truck, rail, and air. Our experienced logistics team will work with you to determine the most efficient and cost-effective shipping method for your specific needs.

FAQ:

Q5: What is the minimum order quantity for ISOPAR M Fluid?

A5: The minimum order quantity for ISOPAR M Fluid is 150KG.