Isopar L Fluid Degreasing Agent For Leather Transparent Liquid Density 0.75g/Cm3

Isopar L Fluid degreasing agent for Leather transparent Liquid density 0.75g/cm3

Product Description:

Isopar L is a chemical mixture mainly composed of branched and linear alkanes, or hydrocarbons. With its clear and transparent liquid appearance, it has a low viscosity and a low aromatic content.

Due to its remarkable solvency power, low odour, and fast evaporation, Isopar L is used for various purposes, including cleaning, degreasing, coating, adhesion, polishing and inks. Moreover, its non-flammability and low residue attractiveness make Isopar L preferable in dangerous and cleanness demanding areas.

Technical Parameters:

Features:

Isopar L has very good solvency power, making it capable of dissolving a variety of contaminants, like oils, greases, waxes, and residues. It can help remove the most stubborn marks and spots from surfaces.

Moreover, compared to other solvents, Isopar L has a low odor, which makes it suitable to be used in areas with poor air circulation or cramped spaces. It decreases the risk of uncomfortable and strong smells resulting from chemical substances.

This solvent is also known for its quick drying capability. After the liquid evaporates, users are left with a fresh and dry surface. This is convenient for brush polishing; no more waiting time before further processing or coating since the surface is already dry.

Another feature of Isopar L is that it is non-reactive with materials like metals, plastics, and rubber. Hence, this solvent can be put to use in a wide range of surfaces without damaging them at the same time.

What is more, Isopar L leaves a minimum residue after it has completely evaporated. This is essential when brush polishing; the result would be a perfect and clean finished surface. As a consequence, no additional cleaning actions are needed.

Finally, Isopar L is considered to be non-flammable due to its high flash point. This enhances the safety in handling and storing this solvent, reducing the chance of fire hazards.

Applications:

Isopar L is a hydrocarbon solvent which can be used as a degreasing agent for leather. Leathers absorb natural oils and greases during the tanning process and through regular use. Therefore, a degreasing agent is commonly used to get rid of these oils and greases. Isopar L has strong solvency power and can effectively penetrate the leather to dissolve and remove the greasy substances.

When using Isopar L as a degreasing agent for leather, it's essential to follow some guidelines. Firstly, it needs to be tested in a small hidden area of the leather to avert potential adverse effects or discoloration impacts. Secondly, sparingly apply it onto a clean cloth or sponge and gently rub the affected areas. Avoid too much saturation which might cause potential damage. Then blot the leather with a clean cloth and dry it naturally in a well-ventilated area, away from heat sources. Last but not least, condition the leather with a leather conditioner or moisturizer corresponding with the leather.

Packing and Shipping:

Isopar L Fluid is typically supplied in 5 gallon pails, 15 gallon drums, and 55 gallon drums. The drums are secured with a two-piece lid and sealed with a plastic film.

The product is packaged in corrugated boxes with inner liners. It is then loaded on pallets or crates and shrink-wrapped for shipment.

The product is shipped via ground transportation or air freight depending on the customer's needs. It is important that the product be stored and handled in accordance with the product's safety and handling guidelines.

FAQ:

Q1: What is ADDSOL's ISOPAR L Fluid?

A1: ADDSOL's ISOPAR L Fluid is a high-grade industrial grade mineral oil developed for a variety of industrial applications.

Q2: Where is ADDSOL's ISOPAR L Fluid manufactured?

A2: ADDSOL's ISOPAR L Fluid is manufactured in China, and has been certified with ISO9001/SGS/Application test.

Q3: What is the minimum order quantity for ADDSOL's ISOPAR L Fluid?

A3: The minimum order quantity for ADDSOL's ISOPAR L Fluid is 150 KGS.

Q4: What is the price of ADDSOL's ISOPAR L Fluid?

A4: The price of ADDSOL's ISOPAR L Fluid is US$1.3-USD2.0/kg.

Q5: What is the delivery time for ADDSOL's ISOPAR L Fluid?

A5: The delivery time for ADDSOL's ISOPAR L Fluid is 10-15 DAYS.